fbpx

7 Best Oscilloscope Probes 2021 Reviews & Buying Guide


The oscilloscopes are technical instruments that are used to measure or observe the electrical waveforms generated within the experiment. These waveforms are visible on the digital screen of the oscilloscope where they can be properly examined for further analysis.

The most popular oscillometer available nowadays is digital and they require a special probe that connects the device with the source of the signal on the experiment. These probes play a crucial role in the operation of the oscilloscope and you must not neglect the following factors if you are looking for one.

  • Bandwidth: If you own an oscilloscope already, you must know its bandwidth capacity. The same goes for the oscilloscope probes as well because each probe has a certain signal bandwidth limit which it can transfer to the oscilloscope without errors.
  • Length: The oscilloscope probes are connected to the device via cables. Hence, you will need to have sufficient length on your probes so that you don’t go through compatibility problems later on.
  • Attenuation Ratio: The attenuation ratio is also provided with the probes. Your oscilloscope will read the probe attenuation ratio and display the results based on this ratio. With a higher attenuation ratio, you will be able to examine higher signals on your oscilloscope.

You must find the accurate probe for your device if you are aiming for precise results. We will be enlisting some of the best oscilloscope probes on our list today that will definitely be useful for a variety of applications and fit perfectly with your oscilloscope. Before you buy one, make sure you go through our “Buying Guide” for the best oscilloscope present later in the article.

Best Oscilloscope Probes

Best Oscilloscope Probes 2021: Reviews

1. Hantek PP-200 Oscilloscope Probes ( 200 MHz )

Hantek PP-200 Oscilloscope Probes 

You must already know about Hantek as it also develops oscilloscopes and similar electronic instruments apart from the additional attachments. If you also have an oscilloscope from Hantek, this probe will be a perfect choice for you.

Coming in 1st place, we have the most advanced oscilloscope probe available in the market right now. The Hantek PP-200 Oscilloscope Probe is the only choice available on our list today that features a bandwidth capacity of 200 MHz. While it is compatible with 200 MHz oscilloscopes, it is also a decent choice if you have a lower-capacity oscilloscope to generate precise results. There is a set of 2 probes available in the package with 1200 mm length on each probe.

The attenuation ratio on this probe is x1/x10 with total system input resistance of 10M/1M and 5 mm tip style. The Hantek PP-200 Oscilloscope Probes can operate on the maximum voltage capacity of 200 volts on DC on x1 ratio and up to 600 volts capacity on x10 ratio. It is also the only option that features a warranty period of 1 year which is great for professional use.

Best Features:

  • 200 MHz bandwidth limit
  • 1200 mm long probe
  • Set of 2 probes
  • Most advanced oscilloscope probe
  • x1/x10 attenuation ratio
  • 10M/1M system input resistance
  • Maximum voltage capacity 200 volts on x1 and 600 volts on x10
  • 1 year warranty period

Pros:

  • It has a dedicated warranty period
  • Coming from a familiar brand
  • Compatibility won’t be an issue

Cons:

  • Most expensive oscilloscope probe set

Buy Now From Amazon

 

2. AUTOUTLET P6100 Universal Oscilloscope Probes ( 100 MHz )

AUTOUTLET P6100 Universal Oscilloscope Probe

Having just an oscilloscope probe will not be a complete solution as you will also require multiple accessories along with it to solve compatibility problems. Hence, Autoutlet is providing a complete set of accessories kits with this oscilloscope probe set.

Our 2nd pick is coming from Autoutlet and it is more than just a simple oscilloscope probe set. This set includes a complete accessories kit along with the oscilloscope probe so that you don’t have to buy anything apart from the set itself. The included probes are universal in nature and feature 10:1 and 1:1 attenuation ratios with a switchable bandwidth up to 100 MHz. Thus, it can be used with any oscilloscope that has a bandwidth capacity of 100 MHz or lower.

The probe tip gets damaged easily as it is always exposed to the source of the signal. Thus, the probe tips on the AUTOUTLET P6100 Universal Oscilloscope Probe are interchangeable. This allows you to always have a high sensitivity on your probes to ensure proper examination and results on the source signal. It also has a very high input impedance with a x10 range that allows you to use it with any oscilloscope irrespective of its manufacturer.

Best Features:

  • 100 MHz bandwidth limit
  • Set of 2 probes
  • Comes with a complete accessory kit
  • Universal oscilloscope set
  • 10:1 and 1:1 attenuation ratio
  • Switchable bandwidth up to 100 MHz
  • Interchangeable tips
  • high input impedance with x10 range

Pros:

  • Universal probe set compatible with all oscilloscopes
  • All necessary accessories are included
  • Free from compatibility problems

Cons:

  • The length of probes is not specified

Buy Now From Amazon

 

3. RioRand PP150 Oscilloscope Clip Probes ( 100 MHz )

RioRand PP150 Oscilloscope Clip Probes

RioRand is one of the popular brands available on our list today as there are already a lot of positive reviews available for this product. Also, it is one of the budget-friendly brands with affordable oscilloscope probe sets.

The RioRand PP150 is similar to any other standard oscilloscopes present in the market, but with a significantly lesser price tag. It also features the standard 100 MHz bandwidth capacity that makes it useful for a variety of applications. You should carefully check if your device supports the attenuation ratio of x1/x10 before buying this probe so that you don’t run into issues later on. It has a maximum system input resistance of 10M/1M with a typical input capacity of 18.5-22.5PF.

You will be able to use this probe set at a maximum voltage of 200 volts DC on x1 and up to 600 volts DC on x10 including the peak AC voltage. With the standard tip type of 5 mm, you will not find it difficult to change the tip of this oscilloscope probe at all. Also, it has a compensation range of 15-40 PF which avoids general errors at the time of experiment and observation.

Best Features:

  • 100 MHz bandwidth limit
  • Set of 2 probes
  • One of the affordable oscilloscope probe sets
  • The attenuation ratio is x1/x10
  • The maximum system input resistance of 10M/1M
  • Typical input capacity of 18.5-22.5PF
  • Maximum voltage capacity 200 volts DC on x1
  • Maximum voltage capacity 600 volts DC on x10
  • Compensation range of 15-40 PF

Pros:

  • The compensation range is great
  • It can be used on high voltage applications
  • Comes with accessories

Cons:

  • It does not have a warranty period

Buy Now From Amazon

 

4. Proster Oscilloscope Clip Probes ( 100 MHz )

Proster 100 MHz Oscilloscope Clip Probes

Proster is also one of the value for money brands on our list today as it features a great oscilloscope probe set that has a justifiable price tag for its specification and application range.

Up next, we have one more universal oscilloscope probe set coming from an affordable brand called Proster. This universal set of oscilloscope probes will deliver you a switchable bandwidth capacity of 100 MHz possible with the attenuation ratio of 10:1 and 1:1. It is suitable for all oscilloscope devices produced by all manufacturers. The probes have standard BNC connectors on the end that are easy to connect to the source as well as safer to operate.

The 48 inches mini grabber clips are color-coded by default in the color black and red to keep the operation as simple as possible. It features a very high sensitivity thanks to the fully shielded BNC connector that does not allow external signal interference. The gold pins are plated externally with pure copper that reduces the contact resistance and introduces a stable connection.

Best Features:

  • 100 MHz bandwidth limit
  • 1220 mm long probe
  • Set of 2 probes
  • Universal oscilloscope probe set
  • Attenuation ratio of 10:1 and 1:1
  • Standard BNC connectors
  • Color-coded 48 inches mini grabber clips
  • Pure copper plated gold pins

Pros:

  • Contact resistance is negligible
  • External signal interference can be avoided
  • Long cables for better applicability

Cons:

  • It does not have a warranty period

Buy Now From Amazon

 

5. Universal Oscilloscope Probes ( 100 MHz )

Universal Oscilloscope Probe with Accessories Kit 100MHz

Thsinde is a lesser-known brand present on our list today that has reserved a slot by providing a decent and highly reliable oscilloscope probes kit. This option is preferable for those who are looking forward to regular use with their oscilloscopes.

Here, we have one more universal oscilloscope probe set that can be paired with almost every single standard oscilloscope present on the market. Thanks to its switchable bandwidth capacity of up to 100 Mhz available with the attenuation ratio of 10:1 and 1:1, it has increased scope for various types of applications. Even the tips on these probes are interchangeable. Hence, it is possible to maintain high sensitivity with these probe sets even after long-term use.

Similar to the options we have observed earlier, the Thsinde Universal Oscilloscope Probe features a fully shielded and welded BNC connector for small signal interference and to maintain precision while recording. The pins on the other hand are pure gold with pure copper plating for versatility and high application capability. The probes consist of 1 BNC double-headed alligator clip, 1 BNC double-headed hook, 1 BNC double stack, and 1 double-headed BNC coaxial line.

Best Features:

  • 100 MHz bandwidth limit
  • Set of 2 probes
  • Attenuation ratio of 10:1 and 1:1
  • Interchangeable tips
  • Fully shielded and welded BNC connector
  • Pure gold pins with pure copper plating
  • Includes additional accessories

Pros:

  • Highly sensitive probes with interchangeable tips
  • Switchable bandwidth up to 100 MHz
  • Compatible with all manufacturers

Cons:

  • Comparatively expensive than similar options

Buy Now From Amazon

 

6. Proster BNC Test Leads Set Oscilloscope Probes ( 100 MHz )

Proster BNC Test Leads Set Oscilloscope Probes BNC to Dual

As we have already provided you some of the premium and heavy-duty options so far on our list, let’s take a look at some of the cheapest yet highly applicable probes that are perfect for casual use whether you are a professional or a hobbyist.

The Proster BNC Test Leads Set Oscilloscope Probes is one of the cheapest oscilloscope probe sets you will find on our list today which is specifically designed for casual use. Still, it has a good value as there are 900 mm long BND dual alligator clip probes present in the package. It allows a maximum bandwidth capacity of 100 MHz which makes all 3 probes highly efficient. The BNC to mini hook has a 150 mm copper mini hook with a 5 mm extension which is perfect for application.

Even though the Proster BNC Test Leads Set Oscilloscope Probes is comparatively cheaper than most other options, there is no compromise made in its quality and durability. It features a fully shielded and welded BNC connector for very small signal interference and a copper-plated gold pin for good contact capability. They are also color-coded so that you can easily avoid problems at the time of connection.

Best Features:

  • 100 MHz bandwidth limit
  • 900 mm long probe
  • Set of 3 probes
  • One of the cheapest oscilloscope probes
  • 900 mm long probes
  • 150 mm copper mini hook with 5 mm extension
  • Fully shielded and welded BNC connector
  • Copper plated gold pin

Pros:

  • Little to no signal interference
  • Contact capability is great
  • Inexpensive price tag

Cons:

  • Not suitable for professional use

Buy Now From Amazon

 

7. Micsoa BNC Test Leads Set Oscilloscope Probes ( 100 MHz )

 Micsoa BNC Test Leads Set Oscilloscope Probes

We have reserved the cheapest oscilloscope probe for the last on our list of the best oscilloscope probes. Micsoa is presenting an ideal option for hobbyists who are studying oscilloscopes and their functionality.

The Micsoa BNC Test Leads Set Oscilloscope Probes is the most affordable oscilloscope probe set available in the market right now that you can get to save a couple of extra bucks. These probes are made out of PVC material and feature good value on the pack. The included probes are BNC to alligator clips, BNC to mini test clips, and BNC to BNC coaxial cable probes. The premium material helps with high performance and also maintains a low loss of around 50 Ohm.

The Micsoa BNC Test Leads Set Oscilloscope Probes are easy as well as safe to use for everyone. It can be easily connected with your oscilloscope and used from a distance thanks to the 1100 mm long probe length. It is perfectly suitable for a variety of applications including and not limited to signal generation, video surveillance, standard BNC interface testing, and much more.

Best Features:

  • 100 MHz bandwidth limit
  • 1100 mm long probe
  • Set of 3 probes
  • Most affordable oscilloscope probe set
  • Made out of PVC material
  • High-performance probes
  • Low loss of around 50 Ohm

Pros:

  • Suitable for many applications
  • Easier and safer to use
  • Good value pack

Cons:

  • Additional accessories are not included

Buy Now From Amazon

Buying Guide For The Best Oscilloscope Probes

Tools and instruments are not necessarily standalone devices, especially if we are dealing with electronic tools. The oscilloscopes are one of the most used electronic devices in the industry right now and they also require additional attachments to perform. One such attachment for the oscilloscopes is the oscilloscope probes that are needed to connect the device with the source of the signal.

As it is the only medium of data transfer from the source to the oscilloscope, you must be extra careful while choosing an oscilloscope probe for your oscilloscope. If you want accurate and precise results, you must go through our top picks for the best oscilloscope probes present in our article today. If you are having trouble selecting an option from our picks, take a look at the following important factors of an oscilloscope probe and make sure your specifications of the probe meet your requirement.

Attenuation Ratio

Different oscilloscope probes have different attenuation ratios which affect their applicability and compatibility towards various oscilloscopes. In most cases, the attenuation ratio is switchable so that the signals that are going through the probe are properly received by your oscilloscope. It also affects the maximum operating voltage capacity of the probe.

With a higher attenuation ratio, you will be capable of operating your device over a higher voltage source without worrying about the safety of the device. But, a higher attenuation ratio on the probe generally increases the amplifier noise that might interfere with your results.

Probe Compensation Range

The compensation range on the probes allows it to adjust the impedance caused by the probe material and fine-tune the data for proper results. This impedance range varies from model to model, causing varying results when you switch the oscilloscope probes for your device. It also changes when you connect the probe to a different channel on the same device.

If the compensation range on your oscilloscope probe is adjustable, you can manually match it with your oscilloscope for the best results. The impedance range can be manually adjusted on most oscilloscope probes with the help of a special screwdriver that is available in the accessory kit.

Bandwidth Capacity

While looking at the oscilloscopes, you must have chosen one that suffices your requirement for bandwidth limit for your application. Each oscilloscope comes with a dedicated bandwidth limit up until which it can detect the signals and display the results on the screen. But, if you want to use a high-capacity oscilloscope up to its full capacity, you will also require a similarly powerful oscilloscope probe that allows higher, if not equal, bandwidth capacity. It is always beneficial to have a higher capacity probe compared to the bandwidth of your application to avoid potential problems in the results.

Probe Length

The oscilloscopes are very intricate devices that can get damaged easily if dropped accidentally. Thus, it is always suggested to keep the oscilloscopes at a safer distance from the source of an experiment where they might come in contact with shock and vibration.

But to do that, you will need a sufficiently long oscilloscope probe that can allow keeping your device at a safer distance. You can take a look at the length of the oscilloscope probe before buying one and simply look up the available area on your experiment space to get an idea about the required oscilloscope probe length.

Conclusion

To get started with your newly bought oscilloscope, you first need to get your setup ready for the job that usually requires purchasing some additional attachments for your device. Most oscilloscopes manufacturers include the compatible oscilloscope probe with the device so that you can get started right away. But, these probes are not the most durable parts and they get easily damaged and need to be replaced to use the device.

Hence, we have brought you the best oscilloscopes probe you can find in the market today. Selecting one out of our picks should not be a problem as we have mentioned the necessary details with each of our picks. Still, if you have any second thoughts, you can refer to our buying guide for the best oscilloscopes, or you can get one of our top recommendations given below.

  • If you are a hobbyist and want a cheaper alternative for a basic oscilloscope probe, you should pick the Micsoa BNC Test Leads Set Oscilloscope Probes. This probe pack includes a set of 3 probes available under a very cheap price tag. Still, the probes are made up of PVC material for a longer life span.
  • Considering you already own a high-end oscilloscope, the Hantek PP-200 Oscilloscope Probes is a perfect choice for you. This is the only probe available on our list that features 200 MHz bandwidth capacity. Also, it comes with a year long warranty period.
  • Proster Oscilloscope Clip Probes is also a decent choice if you often require an oscilloscope for a variety of applications. These probes are available in sets of 2 where each probe is nearly 1220 mm long. It has 100 MHz capacity which should be good for most applications.



Source link

We will be happy to hear your thoughts

Leave a reply

itechtopia.com
Logo
Compare items
  • Total (0)
Compare
0